Guide Specs

SERIES 52 TUBEAXIAL FAN, STEEL SK-880-52 NOVEMBER, 1997

The Direct Drive Tubeaxial Fan, Steel shall be manufactured by Hartzell Fan, Inc.®, Series 52. Standard sizes are 12" through 24". The fan shall be packaged, completely assembled and ready to install.

The tube axial propeller shall be an airfoil design, one-piece cast of 319 aluminum in compliance with Federal Specification QQ-A-601E and ASTM B26. Propellers shall be retained on the motor shaft utilizing a split taper bushing.

Fan sizes 14" through 24" with a 215T frame motor or smaller shall have self-formed flanges. All others have rolled steel flanges continuously welded to the steel drum. All flanges shall have slotted mounting holes. Rigid motor mounts provide support for the motor. Motors shall be totally enclosed air over type. All fractional motors shall be permanently lubricated, non-regreasable. Integral horsepower motors shall be supplied with regreasable bearings and extended lubrication tubes and grease fittings. Blowers shall be designed for mounting in any position from horizontal to vertical.

Fan housings shall be minimum 12 gauge rolled commercial quality, carbon steel and continuously welded in compliance with AWS D1.1 standard. Standard surface coating system shall be an industrial grade air dry enamel paint. This fan is suitable for temperatures up to 180° F.

The fan assembly shall be dynamically balanced at the Hartzell factory prior to shipping. Fans shall be balanced in accordance with AMCA Standard 204-96, fan application category BV-3 (comparable to Grade G6.3). Fans shall be manufactured in accordance with Hartzell's standard quality assurance procedures. Fan performance shall be based on tests conducted in Hartzell's AMCA accredited test laboratory in accordance with the latest revision of AMCA Standard 210 for air performance and AMCA Standard 300 for sound.