Guide Specs

SERIES 39 DIRECT DRIVE ADJUSTABLE PITCH DUCT FAN, STEEL, SK-880-39, JULY 2007

The Series 39 Direct Drive Adjustable Pitch Duct Fan shall be manufactured by Hartzell Fan, Inc.. Standard sizes are 16" through 48". The fan shall be packaged, completely assembled and ready to install.

The duct fan propeller shall be an airfoil design, multiple bladed, cast of 319 aluminum in compliance with Federal Specification QQ-A-601E and ASTM B26. Propellers shall be retained on the motor shaft utilizing a split taper bushing.

All sizes shall have rolled steel flanges continuously welded to the steel drum. All flanges have slotted mounting holes. Rigid motor mounts provide support for the motor. Motors shall be totally enclosed air over type. All fractional motors shall be permanently lubricated, non-regreasable. Integral horsepower motors shall be supplied with regreasable bearings and extended lubrication tubes and grease fittings, when available. Fans shall be designed for mounting in any position from horizontal to vertical. The fan shall be capable of being used in temperatures up to 104 deg F.

Fan housings shall be minimum 12 gauge rolled commercial quality, carbon steel and continuously welded in compliance with AWS D1.1 standards. Standard surface coating system shall be an industrial grade air dry enamel paint.

The fan assembly shall be dynamically balanced at the Hartzell factory prior to shipping. Fans shall be balanced to the AMCA Standard 204, Balance Quality and Vibration Levels for Fans, balance quality grade BV-3. Fans shall be manufactured in accordance with Hartzell's standard quality assurance procedures. Fan performance shall be based on tests conducted in Hartzell's AMCA accredited test laboratory and in accordance with the latest revision of AMCA Standard 210 for air performance and AMCA Standard 300 for sound.